Important Note
- $250 surcharge applied to shipping to OR, WA, ID, MT, ND, SD, ME.
- Sales tax will be automatically waived at check out for out of Texas buyers.
- This item is shipped by freight ONLY to a Commercial Address in a business zone which there is no residential dwelling or Truck Terminal or A Local Installer within the lower 48 state, the buyer is always responsible for unloading the product from the truck, and a forklift or something similar is required for unloading.
- This item can also be picked up at our warehouse, we offer $380 in-store pickup discount, and we have a forklift to help you to load.
- Available in 110V Control Unit (Recommend 30A breaker) & 220V Control Unit (Recommend 20A breaker)
- Optional 4" platform extension
- Optional support bar
- Optional set of 4 approach ramp kit for low profile vehicles
Features
- Commercial grade extral wide extra tall 47 1/2" open center mobile mid rise automatic (electric) safety lock release
- Mobile kits make the lift move around easily
- Available in 110V or 220V PLC control unit or Non-PLC control Unit. PLC control unit is equipped with Oil-Immersed motor, Non-PLC Control unit is equippmed with regular motor.
- PLC - Programmable Logic Controller
- 9,000 lbs lift capacity
- Including 8 lock positions, platform raise 4 3/4" - 5 1/2" when raising each lock position
- Platform is 10 5/8" from ground when lift raises to the 1st lock positon.
- 8 pcs rubber pads included, 4 of each 1 3/8" & 2 3/8"
- Dual cylinder structure with anti-surge valves
- Aluminum motor with 24V low voltage control system
- Self-lubricated bushing and bearing
- Proofed by dynamic test with 120% of rated capacity and static test with 150% rated capacity
- Powder coating finish: Granite Grey (RAL 7026) + Reinorange (RAL 2004)
Warranty
- 5 years lifting structure & 2 years hydraulic cylinder & 2 years power unit
- Note: **Parts only and labor costs for someone to install the replacement part are NOT covered. The hydraulic cylinders come with a 30 days full warranty and after 30 days we will provide a seal kit**
Technical Specification
- Lifting Capacity: 9,000 lbs
- Max Lifting Height: 47 1/4 inches
- Min Height: 4 1/8 inches
- Lifting Time: Less than 50 Secs
- Lowering Time: 30-40 Secs
- Motor Power: 3 HP
- Motor Voltage: Optional 110 V or 220V
- Rated Frequency: 60 HZ
- Phase: 1 PH
- Platform Plate Thickness of Steel: 1/4"(6mm)
- Scissor Arms Thickness of Steel: 13/16"(20mm)
- Hydrualic Oil (Recommend AW46 or AW32): 3.7 Gal (14L)
- Shipping Weight: 1543 lbs
- Platform Shipping Size: 79"L * 69"W * 10"H, Shipping Weight: 1411 lbs
- Control Unit Shipping Size: 36"L * 18"W * 16"H, Shipping Weight: 132 lbs
- Support Bar Shipping Size: 79"L * 9"W * 9"H, Shipping Weight: 138 lbs
- Set of 4 Approach Ramp Shipping Size: 34"L * 19"W * 13"H, Shipping Weight: 172 lbs
- Set of 4 Platform Extension Shipping Size: 20"L * 4"W * 3"H, Shipping Weight: 8.4 lbs
Standard Parts
- 8 pcs rubber pads included, 4 of each 1 3/8" & 2 3/8"
- 1 set of mobile tool kit
3 Reviews
-
9000 extra tall lift
just unpacked it and set it up in my garage.great lift.good height.very pleased with the quality.just retired from 45 years automotive work.yoo old for creepers and jack stands.should work great for home use
-
Nice lift
This thing works great. It is heavy but moves around easy. Great capacity and height.
-
Easy to contact support based in Texas
There are a few things worth mentioning in a review that I would like other people to understand and be aware of. Shipping: The LTL shipping with this DID include liftgate and residential. One of the main reasons I got this lift was that it could be unloaded with liftgate service. The LTL carrier lost the package but Stratus was quick to answer the phone and help. The carrier eventually found the package. Assembly and Manufacturing: The unit arrived with an assembly manual that included excessive safety instructions and even PLC programming instructions but no basics like: how to attach the wheels or the capacity of hydraulic fluid?! These are things you'll have to be smart enough to figure out on your own apparently. In addition, my lift arrived clearly misassembled as the lock solenoids would not engage and the lower feature did not work. This was resolved quickly with a call to Stratus and guidance from their engineering staff, including a video, of how to disassemble the entire control unit where two of the switches had been connected to the harness in the wrong locations. In the process I found a sheered bolt inside the control unit. I have also noticed that the powder coat is very quick to break away from the torsion bars and is incredibly thin in some places. Finally, the extension ramps that were delivered with mine had the holes in the wrong locations. So the beautiful weld-nuts on the lift did not line up with the ramps, I therefore drilled new holes in the ramps and found that even the shortest of the provided hardware was too long and crashed into the internal structure of the lift. Lots of effort on my part that shouldn't have been needed. But again... Stratus picked up the phone ever time I called. Summary: I purchased from this company with the thought that I would be paying a premium for the support. This was true. I wish I had needed their support a lot less than I did. Hopefully they can improve their manufacturing and their design for future customers. In the end, I am happy with my new lift.
