- This item is shipped by freight ONLY to a Commercial Address where there are no residential dwellings or Truck Terminal within the lower 48 state, the buyer is always responsible for unloading the product from the truck, and a forklift or something similar is required for unloading.
- This item can also be picked up at our warehouse, we offer $380 in-store pickup discount, and we have a forklift to help you to load.
- Symmetric & Asymmetric 2 installation methods
- Clear floor overhead single (1) point manual release
- 10,000 lbs lifting capacity
- Direct Drive
- 4 Screw-up rubber pads & 8 truck adapters included. Truck adapter size: 4 of each 2 3/4"(70mm) & 4"(100mm)
- 2 of 2-stage arms & 2 of 3-stage arms
- Top limiter switch
- Proofed by dynamic test with 115% of rated capacity and static test with 150% rated capacity
- Powder coating finish: Granite Grey (RAL 7026) + Reinorange (RAL 2004)
- 5 years lifting structure & 2 years hydraulic cylinder & 2 years power unit
- Note: **Parts only and labor costs for someone to install the replacement part are NOT covered. The hydraulic cylinders come with a 30 days full warranty and after 30 days we will provide a seal kit**
- Lifting Capacity: 10,000 lbs
- Overall Height: 151"
- Width Inside Column(Symmetric): 118 1/8"
- Width Inside Column(Asymmetric): 115 3/8"
- Max Lifting Height: 81 7/8" with truck adaptor, 74 3/4" without truck adaptor
- Min Height: 3 15/16"
- Drive Through(Symmetric): 107 1/4"
- Drive Through(Asymmetric): 103 15/16"
- Lifting Time: About 50 Sec.
- Lowering Time: About 40 Sec.
- Motor Power: 3 HP
- Motor Voltage: 220 V (Recommend 30A Breaker)
- Rated Frequency: 60 HZ
- Phase: 1 PH
- Hydraulic Oil: Recommend AW46/AW32
- Column Thickness of Steel: 5mm
- Carriage Thickness of Steel: 6mm
- Arms Thickness of Steel: 6mm
- Cable Diameter: 0.354"
- Shipping Weight: 1455 lbs
- Shipping Size: 115 "L * 24"W * 35"H