Stratus

Stratus Car Lift Table SAE-LT2600E

No reviews yet Write a Review
Important Note $250 surcharge applied to shipping in the following states: OR, WA, ID, MT, ND, SD, ME. Sales tax will be automatically waived for out of Texas …
SKU: SAE-LT2600E
Availability: Available - Shipping within 24 hours
Shipping: Free Shipping
$5,399.00
Hurry up! Current stock:
icon Share icon Share

Important Note

  • $250 surcharge applied to shipping in the following states: OR, WA, ID, MT, ND, SD, ME.
  • Sales tax will be automatically waived for out of Texas buyers.
  • This item is shipped by freight ONLY to a Commercial Address, Local Installer or Truck Terminal, where there are no residential dwellings.
  • The buyer is always responsible for unloading the product from the truck, a forklift or similar equipment is required for unloading. The freight company allows a timeframe of 30 minutes to unload. Any time exceeding the limit will be charged to the customer.
  • This item can also be picked up at our warehouse, we offer a $300 in-store pickup discount, we have a forklift to help you to load. 

Features

  • Reinforced scissor arms
  • 220V control unit
  • Remote control operation
  • Middle self-locking safety
  • The cable can be side slid in all directions, which is convenient for screw alignment during disassembly and assembly
  • The table is equipped with 6 rubber pads, which is convenient for battery transfer
  • Shut-off valve is included
  • Including 5 lock positions, platform raise 9" - 11 7/16" (230mm-290MM) when raising each lock position
  • Platform is 30 11/16" (780MM) from ground when lift raises to the 1st lock position. 
  • 6 pcs rubber pads included
  • Powder coating finish: Granite Gray (RAL 7026) + Reinorange (RAL 2004) 

Technical Specification

  • Lifting Capacity: 2,600 LBS
  • Max Lifting Height: 72 13/16” 
  • Min Height: 18 ½”
  • The sliding distance between the left and right front and rear of the platform is 30MM (1 3/16")
  • Lifting Time: Less than 50 SEC 
  • Lowering Time: 30-40 SEC
  • Motor Power: 3 HP 
  • Motor Voltage: 220V
  • Rated Frequency: 60 HZ
  • Phase: 1 PH
  • Platform Plate Thickness of Steel: 1/4"(6MM)
  • Scissor Arms Thickness of Steel: 13/16"(20MM)
  • Hydraulic Oil (Recommend AW46 or AW32): 3.7 GAL (14L)
  • Shipping Weight: 827 LBS
  • Shipping Size: 67"L * 39"W * 28"H

Standard Parts

  • 6 pcs rubber pads included

This product hasn't received any reviews yet. Be the first to review this product!

Description

Important Note

  • $250 surcharge applied to shipping in the following states: OR, WA, ID, MT, ND, SD, ME.
  • Sales tax will be automatically waived for out of Texas buyers.
  • This item is shipped by freight ONLY to a Commercial Address, Local Installer or Truck Terminal, where there are no residential dwellings.
  • The buyer is always responsible for unloading the product from the truck, a forklift or similar equipment is required for unloading. The freight company allows a timeframe of 30 minutes to unload. Any time exceeding the limit will be charged to the customer.
  • This item can also be picked up at our warehouse, we offer a $300 in-store pickup discount, we have a forklift to help you to load. 

Features

  • Reinforced scissor arms
  • 220V control unit
  • Remote control operation
  • Middle self-locking safety
  • The cable can be side slid in all directions, which is convenient for screw alignment during disassembly and assembly
  • The table is equipped with 6 rubber pads, which is convenient for battery transfer
  • Shut-off valve is included
  • Including 5 lock positions, platform raise 9" - 11 7/16" (230mm-290MM) when raising each lock position
  • Platform is 30 11/16" (780MM) from ground when lift raises to the 1st lock position. 
  • 6 pcs rubber pads included
  • Powder coating finish: Granite Gray (RAL 7026) + Reinorange (RAL 2004) 

Technical Specification

  • Lifting Capacity: 2,600 LBS
  • Max Lifting Height: 72 13/16” 
  • Min Height: 18 ½”
  • The sliding distance between the left and right front and rear of the platform is 30MM (1 3/16")
  • Lifting Time: Less than 50 SEC 
  • Lowering Time: 30-40 SEC
  • Motor Power: 3 HP 
  • Motor Voltage: 220V
  • Rated Frequency: 60 HZ
  • Phase: 1 PH
  • Platform Plate Thickness of Steel: 1/4"(6MM)
  • Scissor Arms Thickness of Steel: 13/16"(20MM)
  • Hydraulic Oil (Recommend AW46 or AW32): 3.7 GAL (14L)
  • Shipping Weight: 827 LBS
  • Shipping Size: 67"L * 39"W * 28"H

Standard Parts

  • 6 pcs rubber pads included

Customers Also Viewed