Stratus

Stratus Commercial Grade 14000 LBS Alignment Scissor Car Lift With 2 Bridge Jacks SAE-FS14AP

No reviews yet Write a Review
This low profile commerial grade alignment scissor lift is On-Ground surface mount or In-Ground flush mount design, comes with 2 bridge jacks and 2 turn table p…
SKU: SAE-FS14AP
Availability: Available - Shipping within 24 hours
Shipping: Free Shipping
$26,999.00
Hurry up! Current stock:
icon Share icon Share

This low profile commerial grade alignment scissor lift is On-Ground surface mount or In-Ground flush mount design, comes with 2 bridge jacks and 2 turn table plates, it is pneumatic safety lock release with 213 9/16" long platform for long vehicles, easy to operate and maintain. It is suitable to hold 14,000 lbs or less, ideally for inspection, repair and maintenance of various types of vehicles.

Important Note

  • $250 surcharge applied to shipping in the following states: OR, WA, ID, MT, ND, SD, ME.
  • Sales tax will be automatically waived for out of Texas buyers.
  • This item is shipped by freight ONLY to a Commercial Address, Local Installer or Truck Terminal, where there are no residential dwellings.
  • The buyer is always responsible for unloading the product from the truck, a forklift or similar equipment is required for unloading. The freight company allows a timeframe of 30 minutes to unload. Any time exceeding the limit will be charged to the customer.
  • This item can also be picked up at our warehouse, we offer a $300 in-store pickup discount, we have a forklift to help you to load. 

Features

  • Commercial grade open center full rise alignment scissor lift
  • Equipped with 2 turn plates and 2 bridge jacks
  • Pneumatic safety lock release
  • 213 9/16" long platform for longer vehicles
  • 4pcs LED lights
  • In-ground flush mount or on-ground surface mount
  • Dual air cylinders safety structure & 4 hydraulic cylinders drive design
  • Including 11 lock positions, 1 5/8" (42MM) between each lock position.
  • CE tested and approved
  • Proofed by dynamic test with 115% of rated capacity and static test with 150% rated capacity
  • Powder coating finish: Granite Gray (RAL 7026) + Reinorange (RAL 2004) 

Technical Specification

  • Lifting Capacity: 14,000 LBS
  • Bridge Jack Lifting Capacity: 9000 LBS
  • Max Lifting Height: 82 11/16"
  • Min Height: 14 15/16"
  • Platform Length: 213 9/16"
  • Platform width: 29 1/2"
  • Inside Platform Width: 35 7/16"
  • Lifting Time: About 72 SEC 
  • Lowering Time: About 50 SEC
  • Motor Power: 3 HP 
  • Motor Voltage: 220 V (Recommend 20A Breaker)
  • Rated Frequency: 60 HZ
  • Phase: 1 PH
  • Scissor Arm Thickness of Steel: 40MM
  • Runway Thickness of Steel: 6MM
  • Shipping Weight: 11,674 LBS
  • Platform Shipping Size: 2 of 219" X 35"W X 22"H
  • Platform Shipping Weight: 2 of 5277 LBS
  • Control Unit Shipping Size: 28"L X 22"W X 51"H
  • Control Unit Shipping Weight: 366 LBS
  • Ramp Shipping Size: 2 of 43"L X 32"W X 16"H
  • Ramp Shipping Weight: 2 of 333 LBS
  • Cover Shipping Size: 96"L X 13"W X 2"H
  • Cover Shipping Weight: 88 LBS
5 years lifting structure Post, Cross Bar, Carriage, Arms, Truck Adaptors, Safety Locks, Safety Lock Pins, Arm Pin, Runway 3 years hydraulic Power Unit/Station, Cylinder, Hydraulic Hose, Fittings 2 years electrical Electrical, Buttons, Solenoid, Limit Switch 1 Year Balance Cable, Safety Lock Release Cable, Safety Covers, Support Bar, Ramps No Warranty Door Guard, Rubber Pads Note: **Parts only!! Labor costs for someone to install replacement parts are NOT covered. The hydraulic cylinders come with a 30 day full warranty and after 30 days we will provide a seal kit**

This product hasn't received any reviews yet. Be the first to review this product!

Description

This low profile commerial grade alignment scissor lift is On-Ground surface mount or In-Ground flush mount design, comes with 2 bridge jacks and 2 turn table plates, it is pneumatic safety lock release with 213 9/16" long platform for long vehicles, easy to operate and maintain. It is suitable to hold 14,000 lbs or less, ideally for inspection, repair and maintenance of various types of vehicles.

Important Note

  • $250 surcharge applied to shipping in the following states: OR, WA, ID, MT, ND, SD, ME.
  • Sales tax will be automatically waived for out of Texas buyers.
  • This item is shipped by freight ONLY to a Commercial Address, Local Installer or Truck Terminal, where there are no residential dwellings.
  • The buyer is always responsible for unloading the product from the truck, a forklift or similar equipment is required for unloading. The freight company allows a timeframe of 30 minutes to unload. Any time exceeding the limit will be charged to the customer.
  • This item can also be picked up at our warehouse, we offer a $300 in-store pickup discount, we have a forklift to help you to load. 

Features

  • Commercial grade open center full rise alignment scissor lift
  • Equipped with 2 turn plates and 2 bridge jacks
  • Pneumatic safety lock release
  • 213 9/16" long platform for longer vehicles
  • 4pcs LED lights
  • In-ground flush mount or on-ground surface mount
  • Dual air cylinders safety structure & 4 hydraulic cylinders drive design
  • Including 11 lock positions, 1 5/8" (42MM) between each lock position.
  • CE tested and approved
  • Proofed by dynamic test with 115% of rated capacity and static test with 150% rated capacity
  • Powder coating finish: Granite Gray (RAL 7026) + Reinorange (RAL 2004) 

Technical Specification

  • Lifting Capacity: 14,000 LBS
  • Bridge Jack Lifting Capacity: 9000 LBS
  • Max Lifting Height: 82 11/16"
  • Min Height: 14 15/16"
  • Platform Length: 213 9/16"
  • Platform width: 29 1/2"
  • Inside Platform Width: 35 7/16"
  • Lifting Time: About 72 SEC 
  • Lowering Time: About 50 SEC
  • Motor Power: 3 HP 
  • Motor Voltage: 220 V (Recommend 20A Breaker)
  • Rated Frequency: 60 HZ
  • Phase: 1 PH
  • Scissor Arm Thickness of Steel: 40MM
  • Runway Thickness of Steel: 6MM
  • Shipping Weight: 11,674 LBS
  • Platform Shipping Size: 2 of 219" X 35"W X 22"H
  • Platform Shipping Weight: 2 of 5277 LBS
  • Control Unit Shipping Size: 28"L X 22"W X 51"H
  • Control Unit Shipping Weight: 366 LBS
  • Ramp Shipping Size: 2 of 43"L X 32"W X 16"H
  • Ramp Shipping Weight: 2 of 333 LBS
  • Cover Shipping Size: 96"L X 13"W X 2"H
  • Cover Shipping Weight: 88 LBS

Customers Also Viewed