Stratus

Stratus Extra Wide Extra Tall 47 1/4" Commercial Grade Open Center Mobile Mid Rise Electric Safety Lock Release Scissor Car Lift SAE-MS9000XT

No reviews yet Write a Review
This scissor lift can lift up to 47 1/4" high, comes with mobile kit to move around, it is eletric safety lock release design, easy to operate and maintain. It …
SKU: SAE-MS9000XT
Availability: Available - Shipping within 24 hours
Shipping: Free Shipping
$4,649.00
Hurry up! Current stock:
icon Share icon Share

This scissor lift can lift up to 47 1/4" high, comes with mobile kit to move around, it is eletric safety lock release design, easy to operate and maintain. It is suitable to hold 9,000 lbs or less, ideally for inspection, repair and maintenance of various types of vehicles.

Important Note

  • $250 surcharge applied to shipping in the following states: OR, WA, ID, MT, ND, SD, ME.
  • Sales tax will be automatically waived for out of Texas buyers.
  • This item is shipped by freight ONLY to a Commercial Address, Local Installer or Truck Terminal, where there are no residential dwellings.
  • The buyer is always responsible for unloading the product from the truck, a forklift or similar equipment is required for unloading. The freight company allows a timeframe of 30 minutes to unload. Any time exceeding the limit will be charged to the customer.
  • This item can also be picked up at our warehouse, we offer a $380 in-store pickup discount, we have a forklift to help you to load. 

Features

  • Commercial grade extra wide extra tall 47 1/2" open center mobile mid rise automatic (electric) safety lock release
  • Mobile kits make the lift move around easily
  • Optional 4" platform extension
  • Optional support bar
  • Optional set of 4 approach ramp kit for low profile vehicles
  • Available in 110V Control Unit (Recommend 30A breaker)or 220V Control Unit (Recommend 20A breaker) PLC control unit or Non-PLC control Unit. The PLC control unit is equipped with an Oil-Immersed motor, Non-PLC Control unit is equipped with a regular motor.
  • PLC - Programmable Logic Controller
  • Including 8 lock positions, platform raise 4 3/4" - 5 1/2" when raising each lock position
  • Platform is 10 5/8" from ground when lift raises to the 1st lock position. 
  • 8 pcs rubber pads included, 4 of each 1 3/8" & 2 3/8"
  • Dual cylinder structure with anti-surge valves
  • Aluminum motor with 24V low voltage control system
  • Self-lubricated bushing and bearing
  • Proofed by dynamic test with 120% of rated capacity and static test with 150% rated capacity
  • Powder coating finish: Granite Gray (RAL 7026) + Reinorange (RAL 2004) 

Technical Specification

  • Lifting Capacity: 9,000 LBS
  • Max Lifting Height: 47 ¼” 
  • Min Height: 4 ⅛”
  • Lifting Time: Less than 50 SEC 
  • Lowering Time: 30-40 SEC
  • Motor Power: 3 HP 
  • Motor Voltage: Optional 110 V or 220V
  • Rated Frequency: 60 HZ
  • Phase: 1 PH
  • Platform Plate Thickness of Steel: 1/4"(6MM)
  • Scissor Arms Thickness of Steel: 13/16"(20MM)
  • Hydraulic Oil (Recommend AW46 or AW32): 3.7 GAL (14L)
  • Shipping Weight: 1543 LBS
  • Platform Shipping Size: 79"L * 69"W * 10"H
  • Platform Shipping Weight: 1411 LBS
  • Control Unit Shipping Size: 36"L * 18"W * 16"H
  • Control Shipping Weight: 132 LBS
  • Support Bar Shipping Size: 79"L * 9"W * 9"H
  • Support Bar Shipping Weight: 138 LBS
  • Set of 4 Approach Ramp Shipping Size: 34"L * 19"W * 13"H
  • Set of 4 Approach Ramp Shipping Weight: 172 LBS
  • Set of 4 Platform Extension Shipping Size: 20"L * 4"W * 3"H
  • Set of 4 Platform Extension Shipping Weight: 8.4 LBS

Standard Parts

  • Set of 8 rubber pads - 4 of each height 1 3/8" & 2 3/8"
  • Set of 1 mobile tool kit
5 years lifting structure Post, Cross Bar, Carriage, Arms, Truck Adaptors, Safety Locks, Safety Lock Pins, Arm Pin, Runway 3 years hydraulic Power Unit/Station, Cylinder, Hydraulic Hose, Fittings 2 years electrical Electrical, Buttons, Solenoid, Limit Switch 1 Year Balance Cable, Safety Lock Release Cable, Safety Covers, Support Bar, Ramps No Warranty Door Guard, Rubber Pads Note: **Parts only!! Labor costs for someone to install replacement parts are NOT covered. The hydraulic cylinders come with a 30 day full warranty and after 30 days we will provide a seal kit**

This product hasn't received any reviews yet. Be the first to review this product!

Description

This scissor lift can lift up to 47 1/4" high, comes with mobile kit to move around, it is eletric safety lock release design, easy to operate and maintain. It is suitable to hold 9,000 lbs or less, ideally for inspection, repair and maintenance of various types of vehicles.

Important Note

  • $250 surcharge applied to shipping in the following states: OR, WA, ID, MT, ND, SD, ME.
  • Sales tax will be automatically waived for out of Texas buyers.
  • This item is shipped by freight ONLY to a Commercial Address, Local Installer or Truck Terminal, where there are no residential dwellings.
  • The buyer is always responsible for unloading the product from the truck, a forklift or similar equipment is required for unloading. The freight company allows a timeframe of 30 minutes to unload. Any time exceeding the limit will be charged to the customer.
  • This item can also be picked up at our warehouse, we offer a $380 in-store pickup discount, we have a forklift to help you to load. 

Features

  • Commercial grade extra wide extra tall 47 1/2" open center mobile mid rise automatic (electric) safety lock release
  • Mobile kits make the lift move around easily
  • Optional 4" platform extension
  • Optional support bar
  • Optional set of 4 approach ramp kit for low profile vehicles
  • Available in 110V Control Unit (Recommend 30A breaker)or 220V Control Unit (Recommend 20A breaker) PLC control unit or Non-PLC control Unit. The PLC control unit is equipped with an Oil-Immersed motor, Non-PLC Control unit is equipped with a regular motor.
  • PLC - Programmable Logic Controller
  • Including 8 lock positions, platform raise 4 3/4" - 5 1/2" when raising each lock position
  • Platform is 10 5/8" from ground when lift raises to the 1st lock position. 
  • 8 pcs rubber pads included, 4 of each 1 3/8" & 2 3/8"
  • Dual cylinder structure with anti-surge valves
  • Aluminum motor with 24V low voltage control system
  • Self-lubricated bushing and bearing
  • Proofed by dynamic test with 120% of rated capacity and static test with 150% rated capacity
  • Powder coating finish: Granite Gray (RAL 7026) + Reinorange (RAL 2004) 

Technical Specification

  • Lifting Capacity: 9,000 LBS
  • Max Lifting Height: 47 ¼” 
  • Min Height: 4 ⅛”
  • Lifting Time: Less than 50 SEC 
  • Lowering Time: 30-40 SEC
  • Motor Power: 3 HP 
  • Motor Voltage: Optional 110 V or 220V
  • Rated Frequency: 60 HZ
  • Phase: 1 PH
  • Platform Plate Thickness of Steel: 1/4"(6MM)
  • Scissor Arms Thickness of Steel: 13/16"(20MM)
  • Hydraulic Oil (Recommend AW46 or AW32): 3.7 GAL (14L)
  • Shipping Weight: 1543 LBS
  • Platform Shipping Size: 79"L * 69"W * 10"H
  • Platform Shipping Weight: 1411 LBS
  • Control Unit Shipping Size: 36"L * 18"W * 16"H
  • Control Shipping Weight: 132 LBS
  • Support Bar Shipping Size: 79"L * 9"W * 9"H
  • Support Bar Shipping Weight: 138 LBS
  • Set of 4 Approach Ramp Shipping Size: 34"L * 19"W * 13"H
  • Set of 4 Approach Ramp Shipping Weight: 172 LBS
  • Set of 4 Platform Extension Shipping Size: 20"L * 4"W * 3"H
  • Set of 4 Platform Extension Shipping Weight: 8.4 LBS

Standard Parts

  • Set of 8 rubber pads - 4 of each height 1 3/8" & 2 3/8"
  • Set of 1 mobile tool kit

Customers Also Viewed